The Best Thermally Conductive Epoxy in April 2022

After hours of researching and comparing all models on the market, we find out the Best Thermally Conductive Epoxy of 2022. Check our ranking below.

Our Picks For The Top Thermally Conductive Epoxy


SaleBestseller No. 1
MG Chemicals 8349TFM Thermally Condcutive 1 to 1 Epoxy Adhesive, Two Part 25 mL Dual Syringe
  • Thermal conductivity of 1.1 W/(m·K)
  • Flame retardant – meets UL 94V-0
  • 1:1 mix ratio, Working life: 20 minutes
  • Cure time: 16 hours at room temperature or 20 minutes at 65 °C (149 °F)
  • Provides strong electrical insulation
Bestseller No. 2
MG Chemicals - 8329TCM-6ML 8329TCM Thermally Conductive Adhesive, Medium Cure, 14 g, 2 Dispensers, 6 mL Kit,
  • Thermal conductivity: 1.36 W/(m·K)
  • Easy 1:1 mix ratio
  • Adheres to most electronic substrates
  • Stores and ships at slightly below room temperature - no freezing or dry ice required. Very long shelf life of at least two years - even when stored at room temperature
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
Bestseller No. 3
MG Chemicals 832TC-450ML Thermally Conductive Epoxy Encapsulating and Potting Compound, 15 oz Kit, Black
  • Excellent electrical and thermal conductivity
  • Easy 1:1 mix ratio
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
  • Suitable for large production runs
  • Excellent machining properties
Bestseller No. 4
MG Chemicals - 8329TFF-50ML 8329TFF Thermally Conductive Adhesive - Fast Cure Epoxy, 45 mL Dual Cartridge
  • Thermal conductivity of 0. 8 W/(m·K)
  • 1:1 mix ratio
  • Working life: 4 minutes, set time: 15 minutes
  • Cure time: 3 hours at room temperature or 15 minutes at 65 °c (149 °f)
  • Flame retardant – UL 94V-0 registered
Bestseller No. 5
MG Chemicals 8329TFS Thermally Conductive Adhesive - Slow Cure, 25mL Dual Dispenser
  • Thermal conductivity: 1. 22 W/(M K)
  • Working life of 4 hours
  • Cure time of 1 hour 20 minutes at 80 °C or 96 hours at room temperature
  • Dual Dispensing Unit
  • Dispensing Gun sold separately (cat# 8DG-50-1-1)
Bestseller No. 6
MG Chemicals 8329TCS Thermally Conductive Adhesive - Slow Cure Epoxy, 50 mL, 2-Part Kit
  • Excellent 1. 44 W/(make) thermal conductivity
  • Easy 1: 1 mix ratio with 4 hour pot life
  • Adheres to most electronic substrates
  • Stores and ships at room temperature - no freezing or dry ice required. Very long shelf life of at least two years - even when stored at room temperature
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
Bestseller No. 7
MG Chemicals 8330S Silver Epoxy Adhesive, Extreme Conductivity, 4 hr. Working time, 21 g, 2 Dispeners (8330S-21G)
  • Excellent 0.0007 Ω·cm electrical resistivity and 2.4 W/(m·K) thermal conductivity
  • Easy 1:1 mix ratio and long working time may be mixed once and then used as a 1-part epoxy for a four hour production shift
  • Heat Cure is Required. Cure temperature of only 65 °C for 2 hours —lower than most 1-part epoxies and suitable for use on heat sensitive components.
  • Very long shelf life of at least two years even when stored at room temperature
  • Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons
Bestseller No. 8
GENNEL 10g Thermal Conductive Glue, Heatsink Glue, Thermal Adhesive for 3D Printer, LED, PC and Various Electronic Components That Need to Be Bonded - G109
  • GENNEL thermal conductive glue has good thermal conductivity, strong adhesion to most metals and plastics, non-toxic, moisture-proof, non-swelling, non-corrosive to the substrate
  • Suitable for 3D printer's, LED, heat sinks, power supply, transistor, north-south bridge, PC, electrical appliances and various electronic components that need to be firmly bonded
  • Do not use thermal glue between the “CPU and heat sink”! Because the thermal glue is difficult to separate after curing, forced separation may damage the CPU, so please remember. Thermal paste should be used between the CPU and the heat sink, you can search to see (B07V4C918W)
  • The thermal conductive glue begins to cure after being exposed to air. Drying time: [25°C] about 24 hours, it is recommended to stand for a long enough time after bonding, so as not to affect the firmness and integrity of the bonding
  • The curing speed of the thermal glue is related to the relative humidity and temperature in the air. The higher the temperature, the faster the curing speed, and vice versa
Bestseller No. 9
Easycargo 10gram Thermal Conductive Glue Kit, High Performance Silicone Thermal Plaster Adhesive Glue, Cooler Epoxy Compound for Heatsink GPU VRM VRAM LED IC Chips MOSFET BJT Transistor 3D Printer PCB
  • 10 gram high performance thermal glue with strong adhesion.
  • Thermal conductivity > 0.975 w/mk
  • Thermal Impedance: < 0.06
  • Non-Electrical Conductive
  • Premium thermal conductive glue for bonding the interface of cooler heatsink and GPU VRM VRAM PCB LED, BJT MOSFET transistor, Voltage regulator, IC Chips, etc
Bestseller No. 10
Electrically & Thermally Conductive Silver Epoxy Adhesive Cold Solder Replacement High Strength, Electro-Bond 02, 2.5gm Pouch(s)
  • Apperance - Silver
  • Cure Type - Room Temp / Heat Cure
  • Viscosity - Paste
  • Dissipation Factor -
  • Operating Temp - from –50 to +130°C


How Do You Buy The Best Thermally Conductive Epoxy?


Do you get stressed out thinking about shopping for a great Thermally Conductive Epoxy? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Thermally Conductive Epoxy, which is why we have assembled a comprehensive list of the greatest Thermally Conductive Epoxy available in the current market. We’ve also come up with a list of questions that you probably have yourself.


We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Thermally Conductive Epoxy that you consider buying. Your questions might include the following:

  • Is it worth buying an Thermally Conductive Epoxy?
  • What benefits are there with buying an Thermally Conductive Epoxy?
  • What factors deserve consideration when shopping for an effective Thermally Conductive Epoxy?
  • Why is it crucial to invest in any Thermally Conductive Epoxy, much less the best one?
  • Which Thermally Conductive Epoxy are good in the current market?
  • Where can you find information like this about Thermally Conductive Epoxy?

We’re convinced that you likely have far more questions than just these regarding Thermally Conductive Epoxy, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Thermally Conductive Epoxy, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Thermally Conductive Epoxy. Make sure that you are only using trustworthy and credible websites and sources.


We provide an Thermally Conductive Epoxy buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Thermally Conductive Epoxy currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:


  1. Brand Value: Every brand of Thermally Conductive Epoxy has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Thermally Conductive Epoxy?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: his simply is how much bang for the buck you get from your Thermally Conductive Epoxy.
  5. Customer Ratings: Number ratings grade Thermally Conductive Epoxy objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Thermally Conductive Epoxy.
  7. Product Quality: You don’t always get what you pay for with an Thermally Conductive Epoxy, sometimes less, and sometimes more.
  8. Product Reliability: ow sturdy and durable an Thermally Conductive Epoxy is should be an indication of how long it will work out for you. .

We always remember that maintaining Thermally Conductive Epoxy information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding Thermally Conductive Epoxy is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time, Contact us page.

Related Posts